| Model |
UX-2 |
| Display Mode |
|
| Material thickness digits display |
|
| Measurement Range |
PE: 0.63 - 500mm (0.025 - 19.999”)
EE (ThruPaint™): 2.54 - 102mm (0.100 - 4.000”)
PECT: 0.63 - 500mm (0.025 - 19.999”)
PECT: 0.01 - 2.54mm (0.001 - 0.100”)
EEV (ThruPaint™): 1.00 - 152mm (0.040 - 6.000”) |
| Measurement Resolution |
0.01mm (0.001”) |
| Velocity Calibration Range |
1250 to 13995m/s (0.0492 to 0.5510in/µs) |
| Manual |
4 readings per second |
| Measurement Rate |
| Additional Features |
|
| A-Scan |
Stored in memory with each reading for review on PC |
| Calibration Setups |
1 user programmable & 8 pre-calibrated velocities for: aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steel |
| Waterproof - depth rating |
Maximum depth 300 metres (1,000 feet) - equivalent to IP68 |
| Pulser Type |
Dual square wave pulsers |
| Gain |
Manual or automatic gain control (AGC) with 100dB range, or selectable gain: very low (vlow), low, medium, hi (high) or vhi (very high) |
| Timing |
Precision temperature controlled crystal oscillator (TCXO) timing with single shot 100MHz 8bit ultra-low power digitizer |
| Data Logging |
Logging 5,000 with A-scan image & gauge settings in one batch sequential and grid logging alpha numeric batch identification |
| Data Output |
RS232 |
| Calibration Options |
Velocity & material type |
| Transducer Probe Type |
Dual and Single Element |
| Transducer Frequency Range |
1 - 10MHz |
| Transducer Recognition |
Custom automatic (dual transducers) & manual - selectable from a list |
| V-path / dual path error correction |
Automatic |
| Probe Zero |
Automatic (dual transducers) & manual (via integrated probe disk) |
| Display |
12.7mm (1/2") 4.5 digit LCD |
| Display Refresh Rate |
25Hz |
| Units (selectable) |
mm or inches |
| Backlight |
on / off / auto |
| Repeatability / Stability Indicator |
|
| Low Battery Indicator |
|