Model |
UX-2 |
Display Mode |
|
Material thickness digits display |
|
Measurement Range |
PE: 0.63 - 500mm (0.025 - 19.999”)
EE (ThruPaint™): 2.54 - 102mm (0.100 - 4.000”)
PECT: 0.63 - 500mm (0.025 - 19.999”)
PECT: 0.01 - 2.54mm (0.001 - 0.100”)
EEV (ThruPaint™): 1.00 - 152mm (0.040 - 6.000”) |
Measurement Resolution |
0.01mm (0.001”) |
Velocity Calibration Range |
1250 to 13995m/s (0.0492 to 0.5510in/µs) |
Manual |
4 readings per second |
Measurement Rate |
Additional Features |
|
A-Scan |
Stored in memory with each reading for review on PC |
Calibration Setups |
1 user programmable & 8 pre-calibrated velocities for: aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steel |
Waterproof - depth rating |
Maximum depth 300 metres (1,000 feet) - equivalent to IP68 |
Pulser Type |
Dual square wave pulsers |
Gain |
Manual or automatic gain control (AGC) with 100dB range, or selectable gain: very low (vlow), low, medium, hi (high) or vhi (very high) |
Timing |
Precision temperature controlled crystal oscillator (TCXO) timing with single shot 100MHz 8bit ultra-low power digitizer |
Data Logging |
Logging 5,000 with A-scan image & gauge settings in one batch sequential and grid logging alpha numeric batch identification |
Data Output |
RS232 |
Calibration Options |
Velocity & material type |
Transducer Probe Type |
Dual and Single Element |
Transducer Frequency Range |
1 - 10MHz |
Transducer Recognition |
Custom automatic (dual transducers) & manual - selectable from a list |
V-path / dual path error correction |
Automatic |
Probe Zero |
Automatic (dual transducers) & manual (via integrated probe disk) |
Display |
12.7mm (1/2") 4.5 digit LCD |
Display Refresh Rate |
25Hz |
Units (selectable) |
mm or inches |
Backlight |
on / off / auto |
Repeatability / Stability Indicator |
|
Low Battery Indicator |
|